Rolling door motor
Exquisite design & strict with quality control
All of the components inside the operator are made by specific specification and the transmitted material are incorporated with superior alloyed steel. With this unique design and high efficiency, our operator possesses high durable
feature if compares with other competitors.
Completed concealed package & Non-noise when turning
In order to preventing the dust gets into the operator, our completed concealed package will protect the operator not getting any damage effectively and the operator will not make any noise when turning. With this advantage, our
operators can be widely used by any places.
Convenient operation & zero fault movement
It is easy to operate the movement either up, down or stop from rolling shutter. With incorporation the ignition, brake, limited switch and automatic non-descendant lever, our operator will not get any reverse situation while it
is running because of wrong touch the switch of reverse directions.
Equipped with protector of over-voltage
AC110 motor AC220V will stop automatically.
Technical specification of rolling operator (motor)
Item |
Voltage (50 / 60Hz) |
Energy of raising |
Motor |
Current |
Rating /min |
Bracket Width |
Maximum Rolled height |
Weight of Whole motor |
Model |
weight |
gear |
pipe |
GR-30 |
110 ~ 240 |
300 |
#50 |
4” |
150w |
5.5/2.2A 4P/6P |
4n 7 /min |
303cm |
5.5M |
12kgs. |
GR-40 |
110 ~ 240 |
400 |
#50 |
4” |
220w |
6.5/3.0A 4P/6P |
4n 7 /min |
334/364cm |
5.5M |
13kgs. |
GR-50 |
110 ~ 240 |
500 |
#50 |
4” |
370w |
9.0/4.0A 4P |
4n 7 /min |
394cm |
5.5M |
16kgs. |
GR-60 |
110 ~ 240 |
600 |
#50 #60 |
5” |
400w |
11/4.2A 4P |
4n 7 /min |
425cm |
|
|
GR-70 |
110 ~ 240 |
700 |
#60 |
5” |
550w |
4.5A 4P |
4n 7 /min |
455cm |
6.0M |
17kgs. |
GR-80 |
110 ~ 240 |
800 |
#60 |
6” |
550w |
5.0A 4P |
4n 7 /min |
Parts only |
8.0M |
19kgs. |
GR-100 |
110 ~ 240 |
1000 |
#60 #80 |
8” |
750w |
7.5A 4P |
5n 7 /min |
Parts only |
10M |
32kgs. |
Single / three phase (AC380~415) all accepted , Disc-solenoid brake mode, Rating speed can be changed Hiding type rolling motor for home/store decoration.
Optional Accessories of Rolling Shutter
Mail Deliver Slot Mullion Base Lock & Plate
Mullion Base Lock & Plate Pulley Wheel
Manufal lifterl
- Load: 200KG
- Max Height: 3.5M
- Platform: 650 x 460 mm
- Material: Aluminum
Raise up (pull up) device
(pull up by chain-shutter open)
With the equipment of anti-crinkle
It does not need to drive the operator so that the shutter can be descended automatically while user presses the button switch. Moreover, the shutter will not happen crinkle and reverse situation while meets the any obstacles.
Emergency manual stop device
The shutter can be descended or up by pulling the chain while power is failure. The operation is quite easily.
Equipped with the safety device in operation
Our operator is equipped with the disk magnetic braking system so that the chain plate can remove the operator entirely when running. After cut off the power, the operator will be driven by pulling chain plate in order to secure the safety.
Rolling Shutter Whole Structure
Parts List |
1.SADDLE & CLAMP ASSEMBLY |
9.DRUM SPROCKET |
17.SIDE GUIDE |
2.SHAFT (PIPE) 1 1/4 INCH |
10.ROLLER CHAIN |
18.CONTROL BOX OF REMOTE |
3.HOLLOW SECTION CONNECTING BAR |
11.BRACKET |
19.REMOTE TRANSMITTERS |
4.SPRING |
12.ROLLING OPERATOR |
20.PHOTOCELL SENSOR |
5.PULLEY WHEEL |
13.ROLLING OPERATOR |
21.LOCK SET FOR MANUAL TYPE ONLY |
6.PULLEY WHEEL-ENGINEERING PLASTIC |
14.MAIL DELIVERY SLOT |
22.BOTTOM RAIL |
7.WIRE PRETENSION SPRING |
15.MANUAL OVERRIDE LEVER |
23.WEATHER SEAL |
8.DRUM ASSEMBLY |
16.SLATS OF SHUTTER |
24.NYLON POLY GLIDE BELT |
Digram of whole rolling shutter
click the images for zoom in
click the images for zoom in
Structre of rolling shutter's shaft